Profiles & corner solutions
If you’ve got a keen eye for detail, then you’ll be pleased to know that we have too! Like you, we have a similar desire to pursue design elegance and excellence we also provide profiles that can give you the end result you are looking for. It is down to your creativity and personal choice to decide how to give your project the specific look & feel you are looking for.
Your creative vision can always be finished perfectly with a Rockpanel Profile. Made from high quality aluminium, almost all of the profiles are available in RAL/NCS colours to match your design. No matter what method of installation is used (patchwork, ship lap or tongue-and-groove) our corner, end or start profiles can be specified and are available for the 6, 8 and 10 mm boards and can be ordered together with your boards.
Here’s a little tip: For Rockpanel Metallics, Rockpanel Chameleon, Rockpanel Woods and Rockpanel Brilliant we advise to use Blanc anodized or RAL 9005 (Jet black) profiles.
The standard Rockpanel Profile is available with a blanc anodised finish, which provides a sustainable finishing touch. With a thickness of 1.1 mm the risk of warping is minimized at larger spans.
- Material : Aluminium alloy 6063T6
- Material thickness : 1.1 mm
- Material thickness profile J : 1.2 mm
- Standard length : 3055 mm
- Dimensional stability : 23.5 * 10-3 mm/m*K
Profile B - V-nose profile
Profile G - Gunwale corner profile
Profile J - Skirting profile
The cut and trimmed edges of the Rockpanel boards require no further treatment to protect them from moisture.
Finishing the edges with a corner solution is purely to meet your design and aesthetic requirements. We offer a range of corner solutions that give an extra dimension and an attractive finish to your design.
The edges of the Rockpanel boards require no treatment to protect them from moisture. This is a key benefit over other board materials like wood and fibre cement (FCB) board.